| |
|
|
Filter (RH-56)
| The filter has excellent resistance to chemical including corrosive vapour and most acids except phosphoric and hydro solvents which have little or no effect. These have excellent electric qualities, they neither absorb moisture, swell, stretch nor undergo chemical change through contact with moisture. Filter medium fabricated from fire proof 100% micro fiber glass paper pleated with aluminium/cadmium plated mild steel with exclusive plastic base adhesive. Continuous neoprene sponge rubber seals are provided on filter frame for effective sealing . The filter has a filtration efficiency of upto 99.97%, particle retention >0.3 micron and can operate in temperature upto 150º C intermittent 121º C continuous and 100% relative humidity. The filter are tested by the DOP test methods, the most accurate and stringent test. |
| Model |
Size |
| RH-56-01 |
60 x 60 x 15 cm |
| RH-56-02 |
90 x 60 x 15 cm |
| RH-56-03 |
120 x 60 x 15 cm |
|
 |
|
| |
|
|
Exhaust System for Laminar Air Flow (Vertical) (RH-57-05)
| Effective exhaust system through mild steel channel and turbo fans for exhausting air fumes and chemicals etc. Through perforated work-bench sheet and conveniently disposed off on back of the cabinet. |
| Laminar Air Flow Vertical (Complete Stainless Steel). |
| Model |
Size |
| RH-57-06 |
60 x 60 x 60 cm |
| RH-57-07 |
90 x 60 x 60 cm |
| RH-57-08 |
120 x 60 x 60 cm |
|
|
|
| |
|
|
Laminar Air Flow (Vertical) (RH-57)
Structure made of 19 mm Thick Plyboard with melamine lamination finish. Work bench of perforated stainless steel. Side of work bench covered with transparent acrylic sheet/melamine. Front acrylic door of collapsible type. Properly balanced blowers fitted on ¼ H.P. Electric motor provided on the top portion to supply sufficient air to HEPA filter. HEPA filter provided on top of work bench horizontally to supply clean air to the work bench vertically. HEPA Filter efficiency 99.97%, particle retention >0.3 micron. Pre-filters provided on the top to provide filtered air to the blowers. Pre-filter efficiency 90.0%, particle retention >5.0 micron. One fluorescent tube and one U.V. Germicidal tube provided over work bench. Cock for gas on work bench. Static pressure manometer fitted on top. Back cover fixed with screws for convenient removal for attending blowers, filter and motor when needed.
Laminar Air Flow Unit with Ply-board frame structure. |
| Laminar Air Flow Unit with Ply-board frame structure. |
| Model |
Size |
| RH-57-01 |
60 x 60 x 60 cm |
| RH-57-02 |
90 x 60 x 60 cm |
| RH-57-03 |
120 x 60 x 60 cm |
| RH-57-04 |
180 x 60 x 60 cm |
|
|
|
| |
|
|
Pre Filter
| These filters have been specifically designed to meet the requirements of clean air in general ventilating and air-conditioning systems in Hospitals, Computer installations, also in Nuclear, Pharmaceutical, Petro-Chemical, Fertilizers, Synthetic fiber industries and Compressor applications. The heart of the filter is a reinforced washable synthetic non-woven filter media/fiber glass. Fiber media pleated in accordation format along –with a backing of wire/HDPE netting. The mediums are carefully selected to offer the best possible performance to suit specific needs. The complete filter pack is sealed into rigid cassette of mild steel or aluminium. Filter is offered in a three piece construction namely element cassette, outer casing and front grill. For replacement, only the cassette element needs to be changed. The micronic fine filter has a filtration efficiency upto 90.0%, particle retention >5.0 micron and can operate upto 120ºC and 100% relative humidity. Before use, the filters are tested in accordance with the specification of BS 2831 Standards. |
| Model |
Size |
| RH-56-04 |
55 x 55 x 5 cm |
| RH-56-05 |
85 x 55 x 5 cm |
|
|
|
| |
|
|
Laminar Air Flow (Horizontal) (RH-58)
| Same as laminar Air Flow (Vertical) but work–bench made of thick plyboard covered with stainless steel sheet. HEPA Filter provided vertically on back of the work bench to provide clean air to the work bench horizontally. Blowers, motor and pre-filters fitted in lower portion of the cabinet. |
| Model |
Size |
| RH-58-01 |
60 x 60 x 60 cm |
| RH-58-02 |
90 x 60 x 60 cm |
| RH-58-03 |
120 x 60 x 60 cm |
| RH-58-04 |
180 x 60 x 60 cm |
|
|
|
| |
|
|
Laminar Air Flow (Horizontal) Complete S.S.
| Model |
Size |
| RH-58-09 |
60 x 60 x 60 cm |
| RH-58-10 |
90 x 60 x 60 cm |
| RH-58-11 |
120 x 60 x 60 cm |
|
|
| |
|
|
Laminar Air Flow (Horizontal) Mild Steel
| Model |
Size |
| RH-58-12 |
60 x 60 x 60 cm |
| RH-58-13 |
90 x 60 x 60 cm |
| RH-58-14 |
120 x 60 x 60 cm |
|
|
| |
|
|
BIOSAFE CABINET (WOODEN) (RH-59)
| Structure made of 19mm thick ply-board with melamine lamination. Work bench of perforated stainless steel. Front acrylic door with two holes provided with cloth sleeves. Properly balanced blowers fitted on1/4 H.P. electric motor provided on the top portion to supply sufficient air to HEPA filter. One HEPA filter provided on top of work bench horizontally to supply clean air to the work bench vertically. Another HEPA Filter provided on side for exhaust system. Efficiency of HEPA filters 99.97%, particle retention >0.3 micron. One Pre-filter provided on the top to supply pre filtered air to the blowers. One fluorescent tube and one U.V. germicidal tube provided over work bench. Static pressure manometer fitted. Cock for Gas or air & vacuum line. Ground level screw (4No.) fitted. Back cover fixed with screws for convenient removal for attending blowers, filters and motor when needed. Cabinet fitted with exhaust and virus burnt system. |
| Model |
Size |
| RH-59-01 |
60 x 60 x 60 cm |
| RH-59-02 |
90 x 60 x 60 cm |
| RH-59-03 |
120 x 60 x 60 cm |
|
|
|
| |
|
|
Steriflow Portable Laminar Air Flow (RH-59-04)
| For Field Use. Under License from IHBT(CSIR). Specially designed and developed for on field culture and analysis of specimens. MDF sturdy body with melamine lamination. Acrylic covers on front & sides. Front door height adjustable, removable base plate, carrying handle & shoulder strap for on-field carrying. 9 watt ultra violet germicidal lamp. |
|
|
| |
|
|
BIOSAFE CABINET (Mild Steel) (RH-59)
| The work surface of granite is fitted with small wash basin & good quality tap. A gas cock is also fitted. Sliding sash made of toughened glass moves vertically up and down with concealed counter balanced weights. Chamber is fitted with 36W poly-carbonate fluorescent light assembly. Space underneath the work surface is provided with storage compartment. 15/5 Amp socket with switches is provided for light and exhaust system. Supplied with cord and plug to work on 220 volts 1/3 phase 50Hz A.C. Complete with motor blower for exhaust system and Duct to take out fumes. |
| Fume Hood (Stainless Steel). Frame of S.S. 304 grade from outside & 316 grade inside. |
| Model |
Size |
| RH-60-01 |
90 x 60 x 60 cm |
| RH-60-02 |
120 x 60 x 60 cm |
| RH-60-03 |
120 x 75 x 75 cm |
| RH-60-04 |
150 x 75 x 75 cm |
|
| Fume Hood (Mild Steel). M.S. Frame with powder coated paint finish. |
| Model |
Size |
| RH-60-01 |
90 x 60 x 60 cm |
| RH-60-02 |
120 x 60 x 60 cm |
| RH-60-03 |
120 x 75 x 75 cm |
| RH-60-04 |
150 x 75 x 75 cm |
|
|
|
| |
